Tonghui TH2829 Series - Setup File for Single-Group Component (*.STA)

TH2829X Series Operation Manual Chapter 4 [SYSTEM] and [FILE]
57
TH2829x402
4.2.1 Setup file for single-group component (*.STA)
40 groups (when only LCR function is used) of different single groups of
component set file (*.STA file) can be saved in the instrument and 6 groups
(when the LCR and transformer functions are all used) of different single groups
of component set file (*.STA file) can be saved in the instrument, but the *.LCR
file with the number more than 500 can be saved in external U-disc (note: U-disc
is an optional accessory).
Use FILE MANAGE function on the following File menus, the following data will
be saved or loaded in the form of file, which are called *.STA file.
 Control and setting parameter on <MEASURE SETUP> page
 FUNCA
 FUNCB
 FREQ
 LEVEL
 RANGE
 SPEED
 DC BIAS
 BIAS SRC
 TRIG
 ALC
 DELAY
 Rsou
 AVG
 Vm
 Cm