Tonghui TH2829 Series - COPY PINOFFSET and COPY A=>ALL

TH2829X Series Operation Manual Chapter 7 Transformer Auto Scanning Test
90
TH2829x710
ALL the saved data is all the data.
PASS ONLY the saved data is pass data only.
7.7.6 COPY PINOFFSET and COPY A=>ALL
This function is valid in TH2829AX-48 and TH2829NX multichannel transformer
tester.
①COPY PINOFFSET
On <TOOLS> page, move the cursor to COPY PINOFFSET and press the number
key (1-24) to determine the copy offset.
TH2829x711
This function is mainly used to copy the pin automatically when copying the
transformer parameters(COPY A=>ALL).