Tonghui TH2829 Series - Chapter 9 Command Reference; Subsystem Commands for TH2829 X; Display Subsystem Commands

TH2829X Series Operation Manual Chapter 10 HANDLER
157
Chapter 9 Command Reference
The signs in this manual are as follows:
NR1: integer, e.g.:123
NR2: fix-point number, e.g.: 12.3
NR3: floating-point number, e.g.: 12.3E+5
NL: carriage key, integer: 10
ˆEND: EOI signal in IEEE-488
9.1 Subsystem commands for TH2829X
●DISPlay
●ORESister
●TRIGger
●CORRection
●FREQuency
●BIAS
●INITiate
●COMParator
●VOLTage
●FUNCtion
●FETCh?
●Mass MEMory
●CURRent
●LIST
●ABORT
●TRAN
●AMPLitude
●APERture
●STATus
9.1.1 DISPlay subsystem commands
DISPlay subsystem commands are mainly used to set the display page for the
instrument. The :DISPlay? Query returns the current page.
Command tree: