TH2829X Series Operation Manual Chapter 3 Introduction to [MEAS]
CSV DATA: save the test results in scientific notation to excel form in *.CSV
format.
TH2829x308
When the user selects the sweep parameter as frequency and impedance, the
instrument will display the parameters of some ultrasound components, the
detailed parameter is as below:
Static capacitance value when C
t
: 1kHz.
Static capacitance value when D
t
: 1kHz.
Zmin and its corresponding frequency fs (point a on the screen)
Zmax and its corresponding frequency fp (point A on the screen)
Δ F = fp – fs
)(2
22
min
2
sp
T
s
p
m
ffCZf
f
Q
3.6 <MEAS SETUP>
Press [SETUP] to enter into the <MEASURE SETUP> page shown as below:
To Next Page
Loading...
