Tonghui TH2829 Series - Language; Theme; Pass Word

TH2829X Series Operation Manual Chapter 4 [SYSTEM] and [FILE]
53
 HIGH LONG
This soft key is used to select high and long beep.
 HIGH SHORT
This soft key is used to select high and short beep.
 LOW LONG
This soft key is used to select low and short beep.
 TWO SHORT
This soft key is used to select two low and short beeps.
 OFF
This soft key is used to set the fail beep mode OFF.
———————————————————————————————————————
Note: In scanning box, the potentiometer is used to adjust the volume, so when
selecting SCANBOX as the beep source, you can only control the beep to be long
and short but not high and low.
———————————————————————————————————————
4.1.5 LANGUAGE
This zone is used to control and display the current language mode of the
operating instrument.
Operation steps for setting language
1) Move the cursor to Language, the following soft keys will be displayed.
 English
This soft key is used to select English as the operation language.
 Chinese
This soft key is used to select Chinese as the operation language.
4.1.6 THEME
This zone is used to change the current display color of the screen.
Operation steps for setting the theme
1) Move the cursor to THEME, the following soft keys will be displayed.
 DEFAULT
This soft key is used to select the default background, font and color.
 THEME 1
This soft key is used to select the first extra background, font and color.
 THEME 2
This soft key is used to select the second extra background, font and color.
4.1.7 PASS WORD
This zone is used to display the password–protection mode.