Toro Groundmaster Series - Steering Control Valve

SteeringControlValve
g303304
Figure64
1.Steeringcover4.Steeringcontrolvalve
2.Rubberboot
5.Elbowtting
3.Capscrew(4each)6.Straighttting(4each)
RemovingtheSteeringControlValve
1.Parkthemachineonalevelsurface,lowerthecuttingunit(orimplement),
engagetheparkingbrake,setthekeyswitchtotheOFFpositionandremove
thekeyfromthekeyswitch.
2.Removethesteeringcoverfastenersandraisethesteeringcover.
3.ReadandadheretotheinformationprovidedinGeneralPrecautionsfor
RemovingandInstallingtheHydraulicSystemComponents(page5–52).
4.Cleanthehydraulictubeends,andttingsonthecontrolvalvetoprevent
contaminantsfromenteringintothehydraulicsystem.
5.Labelandremovethehydraulictubesfromthettingsonthecontrolvalve.
Allowthetubestodrainintoasuitablecontainer.
6.Installcleancapsandplugsonthehydraulictubesandttingstoprevent
systemcontamination.
Groundsmaster
®
3200,3300and3310
Page5–95
HydraulicSystem:ServiceandRepairs
19240SLRevA