Toro Groundmaster Series - Page 300

BladeSpindleAssemblies(continued)
B.ForGroundsmasterseriescuttingunits,alignthespindlegreasetting
withthedecalonthecuttingunitforeachspindle.
2.Installtheblade,hexbushingoranti-scalpcup,andbladebolt.
•Forstandardseriescuttingunits,tightenthebladeboltfrom68to81N∙m
(50to60ft-lb).
•ForGroundsmasterseriescuttingunits,tightenthebladeboltfrom135to
149N∙m(100to110ft-lb).
3.Slowlyrotatethecuttingbladestocheckthatthebladesdonotcontactany
deckcomponent(s).
4.ForGroundsmasterseriescuttingunits,lubricatethespindlegreasettings
beforereturningthecuttingunittoservice.
5.Lowerthecuttingunitandinstallthedrivebeltandbeltcovers.
CuttingUnits:ServiceandRepairs
Page8–8
Groundsmaster
®
3200,3300and3310
19240SLRevA