Now, you can logon by Telnet in login local mode.
1. Make sure the switch and the PC are in the same LAN. Click Start and type in cmd in the
Search programs and files window and press the Enter button.
Figure 1-4 Run Window
2. Type telnet 192.168.0.1 in the command prompt shown as Figure 1-4, and press the Enter
button.
Figure 1-5 Connecting to the Switch
3. Type the default user name and password (both of them are admin), then press the Enter
button so as to enter User EXEC Mode.
Figure 1-6 Enter into the User EXEC Mode
7
To Next Page
Loading...
