4. Type enable command to enter Privileged EXEC Mode.
Figure 1-7 Enter into the Priviledged EXEC Mode
Now you can manage your switch with CLI commands through Telnet connection.
Login Mode
Firstly configure the Telnet login mode as “login” and the connection password as 456 in the
prompted DOS screen shown in Figure 1-7.
Figure 1-8 Configure login mode
Now, you can logon by Telnet in login mode:
1. Make sure the switch and the PC are in the same LAN. Click Start and type in cmd in the
Search programs and files window and press the Enter button.
Figure 1-9 Run Window
8
To Next Page
Loading...
