6-76 Qualitek mR Owner’s Guide
6.2.6 Factory Setup
The screens in Factory Setup are read-only, meaning the data cannot be changed
except by authorized Uson personnel. The screens, however, contain useful
information that can be readily viewed.
Factory Setup has five tabs. They are:
• Tester. See "Tester" on page 6-77
• Pneumatics. See "Pneumatics" on page 6-78
• Sensors. See "Sensors" on page 6-79
• Regulators. See "Regulators" on page 6-80
• Add-Ons. See "Add-Ons" on page 6-81
To Next Page
Loading...
