Quick Start 4-1
4
Chapter 4
Quick Start
4.1 Power On
Apply power to the Qualitek mR by using the power switch located on the rear
panel of the instrument.
When the power is applied, self-tests are performed to ensure that the instrument is
functioning correctly. The screen will display scrolling messages. It is not
necessary to read these messages and it is normal for them to pause and restart.
Disregard the content of the messages. The entire start-up process requires
approximately two minutes.
When the Home screen appears, it indicates the power-on process completed
100% successfully and the tester is ready for use.
To Next Page
Loading...
