6-50 Qualitek mR Owner’s Guide
6.2.4.5 Passwords
A lock icon shows that passwords have been established to limit access to some
areas of the tester. There are three password levels.
Operator:
Has access to some features available on the Run Mode screen and can run tests.
Operators are not allowed to change tests or calibration.
Supervisor:
Has full control of the tester but is not able to change the network functions of the
tester such as IP addresses.
Administrator:
Shares the functions of the Supervisor level and also has access to the IT functions
of the tester so network settings may be made.
To Next Page
Loading...
