QmR Modbus 9-11
9.4.3 Test Control Information
40031 31 Limits - Max (float)
40033 33 Compensation value [master with no leak decay] (float)
40035 35 Calibration Leak Rate (float)
40037 37 Calibration value [master with leak decay] (float)
Commands to inquire and set program parameters
40039 39 Command: Inquire of Program #n (1 to 127 are valid)
40040 40 Command: Transfer to Program #n (1 to 127 are valid)
Holding
Registers
Address
(decimal)
Name/description of 16-bit values
40041 41 Pass Thru Text 1, (null-terminated 18 character string)
40050 50 Pass Thru Text 2, (null-terminated 18 character string)
40059 59 Pass Thru Text 3, (null-terminated 18 character string)
To Next Page
Loading...
