February, 2008
6-67
WorkCentre 5225, 5230
General Procedures
Launch Version
840-118 ABL LDAP Config “userCertificate;binary” Character string that indicates certificate attribute name
840-119 MetaData Validation Export UserID Enable 1 0~1 0: No output, 1: Output
840-123 S-FMT Scan to IFAX Binary 1 1~2 1: Priority on speed, 2: Priority on profile
840-125 ABL LDAP Info - Use SSL 0 0~1 0: Disable, 1: Enable
840-126 Default Message of Scan to E-Mail NULL
840-127 Authenticated User Name in Mail Body 1 0~1 0: Disable, 1: Enable
840-128 Authenticated User E-Mail Address in Mail
Body
1 0~1 0: Disable, 1: Enable
840-129 Number of Pages in Mail Body 1 0~1 0: Disable, 1: Enable
840-130 File Format in Mail Body 1 0~1 0: Disable, 1: Enable
840-131 IP Address in Mail Body 1 0~1 0: Disable, 1: Enable
840-132 Serial Number in Mail Body 1 0~1 0: Disable, 1: Enable
840-133 MAC Address in Mail Body 1 0~1 0: Disable, 1: Enable
840-134 Device Name in Mail Body 1 0~1 0: Disable, 1: Enable
840-135 Device Location in Mail Body 1 0~1 0: Disable, 1: Enable
840-136 Default Signature Message of Scan to E-
Mail
NULL
840-137 Change from Address Enable for Login
User
0 0~1 0: Prohibited, 1: Permitted
840-138 Change from Address Enable for Login
Invalid User
1 0~1 0: Prohibited, 1: Permitted
840-139 Change from Address Enable for Guest
User
0 0: Prohibited, 1: Permitted
840-140 Change from Address Enable for Not-Login
User
0 0~1 0: Prohibited, 1: Permitted
840-141 E-Mail Enable for Invalid Mail Address User 1 0~1 0: Prohibited, 1: Permitted
840-142 Netsend Transmission Report Control 2 1~3 1: Always output report, 2: Output report only when error occurs, 3: Do not output report
840-144 CWSS Confirmation Sheet Control 2 1~3 1: Always output report, 2: Output report only when error occurs, 3: Do not output report
840-147 Scan OCR Default 1 1~2 1: Follow the direction of OCR result page, 2: Follow the direction of input page
840-148 Scan to Home Enable 0 0~1 0: Disable, 1: Enable
840-149 Scan to My Folder Enable 0 0~1 0: Disable, 1: Enable
Table 6 Scan Service
Chain-
Link Content Default Range Meaning