4-67
ABS (Anti-lock Brake System)
EAS20032
ABS (Anti-lock Brake System)
Removing the hydraulic unit assembly
Order Job/Parts to remove Q’ty Remarks
Windshield/Front cover/Rearview mirror/Wind-
shield inner panel/Bottom side cowling/Side
panel/Front cowling assembly
Refer to “GENERAL CHASSIS (1)” on
page 4-1.
Brake fluid
Drain.
Refer to “BLEEDING THE HYDRAULIC
BRAKE SYSTEM” on page 3-16.
1 ABS ECU coupler 1 Disconnect.
2 Brake hose union bolt 4
3 Brake hose gasket 8
4
Rear brake hose (rear brake master cylinder to
hydraulic unit)
1 Disconnect.
5
Front brake hose (hydraulic unit to front brake
caliper)
1 Disconnect.
6
Front brake hose (front brake master cylinder to
hydraulic unit)
1 Disconnect.
7
Rear brake hose (hydraulic unit to rear brake
caliper)
1 Disconnect.
8 Hydraulic unit assembly 1
9 Hydraulic unit assembly bracket 1
1
3
2
3
3
2
3
4
6
5
7
8
9
7 N・m (0.7 kgf・m, 5.2 lb・ft)
7 N・m (0.7 kgf・m, 5.2 lb・ft)
30 N・m (3.0 kgf・m, 22 lb・ft)
To Next Page
Loading...
Need help?
General
