2-11
TIGHTENING TORQUES
EAS20017
TIGHTENING TORQUES
EAS30016
ENGINE TIGHTENING TORQUES
Generator rotor nut
Tighten the generator rotor nut to 65 N·m (6.5 kgf·m, 48 lb·ft), and then tighten them further to reach
the specified angle 120ï‚°.
EAS30017
CHASSIS TIGHTENING TORQUES
Item
Thread
size
Q’ty Tightening torque Remarks
Exhaust pipe nut M8 4 20 N·m (2.0 kgf·m, 15 lb·ft)
Muffler protector bolt M6 3 8 N·m (0.8 kgf·m, 5.9 lb·ft)
Front muffler protector bolt M6 3 10 N·m (1.0 kgf·m, 7.4 lb·ft)
Spark plug M10 2 13 N·m (1.3 kgf·m, 9.6 lb·ft)
Cylinder head cover bolt M6 6 10 N·m (1.0 kgf·m, 7.4 lb·ft)
Generator rotor nut M18 1 See TIP.
Generator cover bolt M6 19 10 N·m (1.0 kgf·m, 7.4 lb·ft)
Clutch assembly nut M16 1 65 N·m (6.5 kgf·m, 48 lb·ft)
Oil filter cartridge M20 1 17 N·m (1.7 kgf·m, 13 lb·ft)
Oil filter cartridge union bolt M20 1 40 N·m (4.0 kgf·m, 30 lb·ft)
Coolant drain bolt M12 1 1.6 N·m (0.16 kgf·m, 1.2 lb·ft)
Engine oil drain bolt M14 1 43 N·m (4.3 kgf·m, 32 lb·ft)
Item
Thread
size
Q’ty Tightening torque Remarks
Front wheel axle M14 1 91 N·m (9.1 kgf·m, 67 lb·ft)
Front wheel axle pinch bolt M8 4 21 N·m (2.1 kgf·m, 15 lb·ft) See TIP.
Rear wheel pulley bolt M10 5 64 N·m (6.4 kgf·m, 47 lb·ft)
Rear wheel axle nut M24 1 160 N·m (16 kgf·m, 118 lb·ft)
Front brake caliper bolt M10 4 35 N·m (3.5 kgf·m, 26 lb·ft)
Rear brake caliper bolt M10 2 27 N·m (2.7 kgf·m, 20 lb·ft)
Front brake hose union bolt M10 3 30 N·m (3.0 kgf·m, 22 lb·ft)
Rear brake hose union bolt M10 2 30 N·m (3.0 kgf·m, 22 lb·ft)
Front brake caliper bleed screw M8 2 6 N·m (0.6 kgf·m, 4.4 lb·ft)
Rear brake caliper bleed screw M7 1 6 N·m (0.6 kgf·m, 4.4 lb·ft)
Upper handlebar holder bolt M8 4 23 N·m (2.3 kgf·m, 17 lb·ft)
Lower handlebar holder nut M10 2 34 N·m (3.4 kgf·m, 25 lb·ft)
Lower bracket pinch bolt M8 4 23 N·m (2.3 kgf·m, 17 lb·ft)
Upper bracket pinch bolt M8 2 30 N·m (3.0 kgf·m, 22 lb·ft)
Lower ring nut M30 1 See TIP.
To Next Page
Loading...
Need help?
General
