2-7
CHASSIS SPECIFICATIONS
EAS20015
CHASSIS SPECIFICATIONS
Chassis
Frame type Diamond
Caster angle 26.0 ï‚°
Trail 98 mm (3.9 in)
Front wheel
Wheel type Cast wheel
Rim size 15M/C x MT3.5
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Wheel axle bending limit 0.25 mm (0.01 in)
Rear wheel
Wheel type Cast wheel
Rim size 15M/C x MT4.5
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Wheel axle bending limit 0.25 mm (0.01 in)
Front tire
Type Tubeless
Size 120/70R15M/C 56H
Manufacturer/model BRIDGESTONE/BATTLAX SCF
Rear tire
Type Tubeless
Size 160/60R15M/C 67H
Manufacturer/model BRIDGESTONE/BATTLAX SCR
Tire air pressure (measured on cold tires)
1 person
Front 225 kPa (2.25 kgf/cm², 33 psi)
Rear 250 kPa (2.50 kgf/cm², 36 psi)
2 persons
Front 225 kPa (2.25 kgf/cm², 33 psi)
Rear 280 kPa (2.80 kgf/cm², 41 psi)
Front brake
Type Hydraulic dual disc brake
Disc outside diameter ï‚´ thickness 267.0 ï‚´ 4.0 mm (10.51 ï‚´ 0.16 in)
Brake disc thickness limit 3.5 mm (0.14 in)
Brake disc runout limit (as measured on
wheel) 0.15 mm (0.0059 in)
Brake pad lining thickness limit 0.5 mm (0.02 in)
Master cylinder inside diameter 15.00 mm (0.59 in)
Caliper cylinder inside diameter (Left) 30.23 mm, 27.00 mm (1.19 in, 1.06 in)
Caliper cylinder inside diameter (Right) 30.23 mm, 27.00 mm (1.19 in, 1.06 in)
Specified brake fluid DOT 4
To Next Page
Loading...
Need help?
General
