2-9
ELECTRICAL SPECIFICATIONS
EAS20016
ELECTRICAL SPECIFICATIONS
Voltage
System voltage 12 V
Ignition system
Ignition system TCI
Ignition timing (B.T.D.C.) 3.0–7.0 /1200 r/min
Engine control unit
Model TBDF4Q (XP560D)
TBDF4U (XP560E)
Ignition coil
Primary coil resistance 1.87–2.53
Secondary coil resistance 12.00–18.00 k
Spark plug cap
Resistance 7.50–12.50 k
Lean angle sensor output voltage
Operating angle 65
Output voltage up to operating angle 0.4–1.4 V
Output voltage over operating angle 3.7–4.4 V
Charging system
Charging system AC magneto
Standard output 14.0 V, 25.0 A at 5000 r/min
Stator coil resistance 0.224–0.336
Rectifier/regulator
Regulator type Three-phase
Regulated voltage (DC) 14.1–14.9 V
Battery
Model YTZ12S
Voltage, capacity 12 V, 11.0 Ah (10 HR)
Bulb wattage
Headlight LED
Brake/tail light LED
Front turn signal light LED
Rear turn signal light LED
Auxiliary light LED
License plate light 5.0 W
Meter lighting LED
Indicator light
High beam indicator light LED
Turn signal indicator light LED
Malfunction indicator light LED