2-2
ENGINE SPECIFICATIONS
EAS20014
ENGINE SPECIFICATIONS
Engine
Combustion cycle 4-stroke
Cooling system Liquid cooled
Valve train DOHC
Displacement 562 cm³
Cylinder arrangement Inline
Number of cylinders 2-cylinder
Bore ï‚´ stroke 70.0 ï‚´ 73.0 mm (2.76 ï‚´ 2.87 in)
Compression ratio 10.9 : 1
Compression pressure 1653–2128 kPa/360 r/min (16.5–21.3 kgf/cm²/
360 r/min, 235.1–302.7 psi/360 r/min)
Starting system Electric starter
Fuel
Recommended fuel Premium unleaded gasoline (E10 acceptable)
(XP560D_ZAF, XP560E)
Unleaded gasoline only. Minimum research
octane number 95 (XP560D_RUS)
Fuel tank capacity 15 L (4.0 US gal)
Fuel reserve amount 3.0 L (0.79 US gal)
Engine oil
Recommended brand YAMALUBE
SAE viscosity grades 10W-40
Recommended engine oil grade API service SG type or higher, JASO standard
MA
Lubrication system Dry sump
Engine oil quantity
Oil change 2.60 L (2.75 US qt)
With oil filter removal 2.90 L (3.07 US qt)
Quantity (disassembled) 3.50 L (3.70 US qt)
Cooling system
Coolant quantity
Radiator (including all routes) 1.54 L (1.63 US qt)
Coolant reservoir (up to the maximum level
mark) 0.25 L (0.26 US qt)
Radiator cap valve opening pressure 107.9–137.3 kPa (1.08–1.37 kgf/cm², 15.6–19.9
psi)
Cooling system leak test pressure 137.3 kPa (1.37 kgf/cm², 19.9 psi)
Thermostat
Valve opening temperature 80.0–84.0 C (176.00–183.20 F)
Valve full open temperature 95.0 ï‚°C (203.00 ï‚°F)
Valve lift (full open) 8.0 mm (0.31 in)
Spark plug(s)
Manufacturer/model NGK/LMAR7G
Spark plug gap 0.7–0.8 mm (0.028–0.031 in)