Yamaha TMAX TECH MAX 2020 User Manual

9-115
P0500
EAS20674
P0500
EAS33303
TROUBLESHOOTING
Item
Rear wheel sensor: no normal signals are received from the rear wheel sensor.
Fail-safe system
• Able to start engine
• Able to drive vehicle
Procedure
1. Connection of rear wheel sensor coupler.
• Check the locking condition of the coupler.
• Disconnect the coupler and check the pins (bent or broken terminals and locking condition of the
pins).
2. Connection of ABS ECU coupler.
• Check the locking condition of the coupler.
• Disconnect the coupler and check the pins (bent or broken terminals and locking condition of the
pins).
3. Connection of ECU coupler.
• Check the locking condition of the coupler.
• Disconnect the coupler and check the pins (bent or broken terminals and locking condition of the
pins).
Is the coupler condition normal?
YES
 Go to step 2.
NO
a. Connect the coupler securely or replace the wire harness.
b. Execute the diagnostic mode. (Code D07)
c. Rotate the rear wheel by hand and check that the indicated value increases.
Is that value increased?
YES
 Go to step 7.
NO
 Go to step 2.
Is the coupler condition normal?
YES
 Go to step 3.
NO
a. Connect the coupler securely or replace the wire harness.
b. Execute the diagnostic mode. (Code D07)
c. Rotate the rear wheel by hand and check that the indicated value increases.
Is that value increased?
YES
 Go to step 7.
NO
 Go to step 3.

Yamaha TMAX TECH MAX 2020 Specifications

General

Brand	Yamaha
Model	TMAX TECH MAX 2020
Category	Motorcycle
Language	English