2-44
CABLE ROUTING
1. Rear brake lock caliper
2. Rear brake lock cable
3. Holder
4. Rear brake hose (hydraulic unit to rear
brake caliper)
5. Swingarm (right)
6. Clamp
7. Rear brake caliper
8. Rear wheel sensor lead
9. Rear brake disc
10. Bracket
11. Rear frame
12. Bracket
A. Install the holder with the rotation stopper
in contact with the swingarm.
B. Install the bracket with the rotation stopper
against the rear frame.
C. Install the clamp with the clamp in contact
with the protector end of the rear wheel
sensor lead.
D. Install the rear brake hose with the rear
brake hose in contact with the stopper of
the rear brake caliper.
E. Route the rear brake lock cable between
the bracket.
F. Route the rear brake hose through the
guide portion of the bracket.
G. Fasten the rear brake hose (hydraulic unit
to rear brake caliper) and rear wheel sen-
sor lead so that the rear wheel sensor lead
is located on the left side.
H. Insert the bracket into the swingarm hole.
To Next Page
Loading...
Need help?
General
