EasyManua.ls Logo

Yamaha TMAX TECH MAX 2020 - Page 94

Yamaha TMAX TECH MAX 2020
688 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-2
PERIODIC MAINTENANCE
6 * Rear brake
• Check operation, fluid level,
and for fluid leakage.
• Replace brake pads if neces-
sary.

7 * Brake hoses
• Check for cracks or damage. 
• Replace. Every 4 years
8 * Brake fluid • Change. Every 2 years
9
Rear brake lock
cable
• Check cable length.
• Adjust if necessary.
At the initial interval and 4000 km (2400 mi) after the initial 1000 km
(600 mi) and every 5000 km (3000 mi) thereafter.
10 * Rear brake lock
• Check operation.
• Adjust.

11 * Wheels
• Check runout and for damage.
• Replace if necessary.

12 * Tires
• Check tread depth and for
damage.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.

13 * Wheel bearings
• Check bearing for looseness
or damage.

14 * Drive belt
• Check belt condition.
• Replace if damaged.
• Check belt tension.
• Adjust if necessary.
At the initial interval and every 10000 km (6000 mi) until 40000 km
(24000 mi), and every 5000 km (3000 mi) thereafter.
15 *
Drive pulley and
drive axle
•Lubricate. 
16 * Steering bearings
• Check bearing assemblies for
looseness.

• Moderately repack with lithi-
um-soap-based grease.

17 * Chassis fasteners
• Make sure that all nuts, bolts
and screws are properly tight-
ened.

18
Front and rear
brake lever pivot
shaft
• Lubricate with silicone grease. 
19 *
Sidestand, center-
stand
• Check operation.
• Lubricate with lithium-soap-
based grease.

20 * Sidestand switch
• Check operation and replace
if necessary.

21 * Front fork
• Check operation and for oil
leakage.
• Replace if necessary.

22 *
Shock absorber
assembly
• Check operation and for oil
leakage.
• Replace if necessary.

23 *
Rear suspension
relay arm and
connecting arm
pivoting points
• Check operation. 
24 Engine oil
• Change (warm engine before
draining).
• Check oil level and vehicle for
oil leakage.
At the initial interval and when the oil change indicator flash-
es or comes on.
25
Eng
ine oil filter
cartridge
• Replace. 
26 * Cooling system
• Check coolant level and vehi-
cle for coolant leakage.

• Change. Every 3 years
27 * V-belt • Replace.
When the V-belt replacement indicator flashes [every 20000 km
(12000 mi)]
No. ITEM
CHECK OR MAINTENANCE
JOB
ODOMETER READINGS
ANNUAL
CHECK1000 km
(600 mi)
10000 km
(6000 mi)
20000 km
(12000 mi)
30000 km
(18000 mi)
40000 km
(24000 mi)

Table of Contents