u
Quick Reference
Easily Set Parameters for Specific Applications
Preset parameter defaults are available for setting up applications. Refer to Application Selection on
page 97.
Run a Motor One Frame Larger
This drive can operate a motor one frame size larger when running variable torque loads such as fans and pumps. Refer to C6-01: Drive Duty Mode
Selection on page 166.
Drive a Synchronous PM Motor
A1000 can operate synchronous PM motors. Refer to Subchart A-3: Operation with Permanent
Magnet Motors on page 95.
<99>
<99>
PM motor control modes are not available on 600 V class drives, CIMR-Ao5oooooooo.
Perform Auto-Tuning
Automatic tuning sets motor parameters. Refer to Auto-Tuning on page 100.
Maintenance Check Using Drive Monitors
Use drive monitors to check if fans, capacitors, or other components require maintenance. Refer to Performance Life Monitors Maintenance
Monitors on page 351.
Fault Display and Troubleshooting
Refer to Drive Alarms, Faults, and Errors on page 295 and Refer to Troubleshooting without Fault Display on page 336.
Standards Compliance
Refer to UL Standards on page 498.
YASKAWA ELECTRIC SIEP C710616 31B YASKAWA AC Drive – A1000 Technical Manual
3
To Next Page
Loading...
Need help?
General
