xiii
182582-1CD
182582-1CD
Safety
Customer Support Information
MH900, DX200 Controller
Customer Support Information
If assistance is needed with any aspect of the MH900, DX200 Controller
system, please contact your local Yaskawa Customer Support (see back
cover for details.)
When contacting Yaskawa Customer Support please have the following
information:
• System: MH900, DX200 Controller
• Primary Application:
• Software Version:
Located on programming pendant
by selecting {Main Menu} -
{System Info} - {Version}
• Robot Serial Number:
(Located on robot data plate)
• Robot Sales Order Number:
(Located on controller data plate)
WARNING
• Maintenance and inspection must be performed by specified
personnel.
Failure to observe this caution may result in electric shock or injury.
• For disassembly or repair, contact your Yaskawa representative.
• Do not remove the motor, and do not release the brake.
Failure to observe these safety precautions may result in death or
serious injury from unexpected turning of the manipulator's arm.
Use e-mail for routine inquiries only. If there is an urgent or
emergency need for service, replacement parts, or
information, contact Yaskawa Customer Support.
To Next Page
Loading...
