YASKAWA DX200 - Page 147

8-60
182582-1CD
182582-1CD
8 System Setup
8.6 Interference Area
MH900, DX200 Controller
4. Select “METHOD”.
– ”AXIS INTERFERENCE” and “CUBIC INTERFERENCE” are
displayed alternately every time [SELECT] is pressed. If “CUBIC
INTERFERENCE” is selected, the window is changed.
5. Select “CONTROL GROUP”.
(1) A selection dialog box appears.
(2) Select the desired control group.
6. Select “REF COORDINATES”.
(1) A selection box appears.
(2) Select the desired coordinate.
(3) If the user coordinates are selected, the number input line is
147 of 552