YASKAWA DX200 - Page 146

8 System Setup
8.6 Interference Area
8-59
182582-1CD
182582-1CD
MH900, DX200 Controller
8.6.2.3 Setting Operation
1. Select {ROBOT} under the main menu.
2. Select {INTERFERENCE}.
– The INTERFERENCE AREA window is shown.
3. Select the desired cube number.
– Select the desired cube number with the [PAGE] or by number input.
– When selecting the cube number by number input, select [PAGE] to
input the desired signal number.
146 of 552