8-92
182582-1CD
182582-1CD
8 System Setup
8.7 Shock Detection Function
MH900, DX200 Controller
DETAIL window.
(2) Move the cursor to “UNUSED” of “ROBOT/STATION”, and press
[SELECT].
(3) The selection box appears.
(4) Point the cursor to the robot to be added and press [SELECT].
(5) When the addition of robot is completed, press [ENTER].
(6) The DETAIL window closes and the JOB CONTENT window
appears.
5. Press [INSERT] then [ENTER].
– The instruction displayed in the input buffer line is registered.
To Next Page
Loading...
