YASKAWA DX200 - Page 214

8 System Setup
8.15Numeric Key Customize Function
8-127
182582-1CD
182582-1CD
MH900, DX200 Controller
8.15.2.9 Pulse Output Allocation
Set this function in the KEY ALLOCATION (SIM) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and
press [SELECT].
– A selection list appears.
2. Select “PULSE OUTPUT”.
– The output No. and output time are displayed in the “ALLOCATION
CONTENT”.
(1) To change the output No. or output time, move the cursor to the
No. or time and press [SELECT]. Then numeric value can be
entered.
(2) Input the number or time to be changed, and press [ENTER].
214 of 552