YASKAWA DX200 - Page 215

8-128
182582-1CD
182582-1CD
8 System Setup
8.15Numeric Key Customize Function
MH900, DX200 Controller
8.15.2.10 Group (4-bit/8-bit) Output Allocation
Set this function in the KEY ALLOCATION (SIM) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and
press [SELECT].
– A selection list appears.
2. Select “4 BIT OUTPUT” or “8 BIT OUTPUT”.
– The output No. and output value are displayed in the “ALLOCATION
CONTENT”.
(1) To change the output No. or output value, move the cursor to the
No. or value and press [SELECT]. Then numeric value can be
entered.
(2) Input the number or value to be changed, and press [ENTER].
215 of 552