YASKAWA DX200 - Page 216

8 System Setup
8.15Numeric Key Customize Function
8-129
182582-1CD
182582-1CD
MH900, DX200 Controller
8.15.2.11 Analog Output Allocation
Set this function in the KEY ALLOCATION (SIM) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and
press [SELECT].
– A selection list appears.
2. Select “ANALOG OUTPUT”.
– The output port number and the output voltage value are displayed
in the “ALLOCATION CONTENT”.
(1) To change the output port No. or output voltage value, move the
cursor to the No. or voltage value and press [SELECT]. Then
numeric value can be entered.
(2) Input the number or voltage value to be changed, and press
[ENTER]
216 of 552