YASKAWA DX200 - Page 217

8-130
182582-1CD
182582-1CD
8 System Setup
8.15Numeric Key Customize Function
MH900, DX200 Controller
8.15.2.12 Analog Incremental Output Allocation
Set this function in the KEY ALLOCATION (SIM) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and
press [SELECT].
– A selection list appears.
2. Select “ANALOG INC OUTPUT”.
– The output port No. and incremental value are displayed in the
“ALLOCATION CONTENT”.
(1) To change the output port No. or incremental value, move the cur-
sor to the No. or incremental value and press [SELECT]. Then
numeric values can be entered.
(2) Input the number or incremental value to be changed, and press
[ENTER].
217 of 552