YASKAWA DX200 - Page 263

8-176
182582-1CD
182582-1CD
8 System Setup
8.21Preventive Maintenance Function
MH900, DX200 Controller
In the case of the graph above, it shows a “variation” ! “Lo” of the T-axis,
and the warning output signal, which is set by “torque variation low”, is
ON.
• When selecting “=Meas.”,
the measured value is displayed on the graph.
ཱ =Group
Select {=Group}, and the pull down menu appears. Select the group to
display.
ི =Name
The names set in the each setting window are displayed.
ཱི =Renew
Pressing the “=Renew” button updates the latest data.
ུ =Days
Set the number of the days between 5 and 150 days to be displayed. The
latest data is displayed on the right side of the graph, and the old data set
by “=Days” is displayed on the left side of the graph.
263 of 552