YASKAWA DX200 - Page 265

8-178
182582-1CD
182582-1CD
8 System Setup
8.21Preventive Maintenance Function
MH900, DX200 Controller
4. Select {Display}, select the {=LIFE CALCULATION} or {=TORQUE
MONITOR] in the pull down menu.
– The lifetime calculation window or the torque monitor window
appears.
5. Move the cursor over the “Reset” on the axis window of which speed
reducer is replaced, and press {Select}.
– The confirmation dialog appears.
6. Select “Yes”.
– The data of its axis is reset, and the replacement day is recorded
into the “=INSPECTION RECORD” window.
– The operation is canceled when select “No”.
The procedures above can be performed in the lifetime window or the
torque monitor window.
The replacement day is recorded into the “INSPECTION RECORD”
window by performing the procedures above.
265 of 552