YASKAWA DX200 - Page 276

8 System Setup
8.21Preventive Maintenance Function
8-189
182582-1CD
182582-1CD
MH900, DX200 Controller
– When {CONTACTOR} is selected:
6. When replaced with a new component, select “”.
– A confirmation dialog box appears. When replaced with a new
component, select “YES”.
7. When replaced with an used component, select {BEGINNING}.
– A window to input the numerical value appears. Input the
replacement date using half-width characters like {2009.3.14}.
After that, a following confirmation dialog box appears. When
replaced with an used component, select “YES”.
276 of 552