YASKAWA DX200 - Page 277

8-190
182582-1CD
182582-1CD
8 System Setup
8.21Preventive Maintenance Function
MH900, DX200 Controller
8. When manually setting the approximate value to the leftover life, input
the numerical value “0 - 100%”.
9. When the numerical value displayed in the confirmation dialog box is
correct, select “YES”.
8.21.7.2 Mask of Replacement Time Display (Signal Display)
Perform the masking of the replacement time display according to the
following procedures:
1. When any of the components comes to the replacement time, the
message is displayed per unit.
277 of 552