8 System Setup
8.21Preventive Maintenance Function
8-191
182582-1CD
182582-1CD
MH900, DX200 Controller
2. The message is also displayed per component.
Invalidate the output.
– After checking the components, invalidate the output.
3. The general output signal turns OFF. And the message turns to be
hidden. However, the stepwise display remains D.
– * Before the replacement, perform the above operation in order to
detect the multiple components because only one general
output of life diagnosis can be output for one controller.
That is, “Replacement time of component Turn ON the
general output Check the component and invalidate the
output Turn OFF the general output Replacement time of other
component Turn ON the general output”.
To Next Page
Loading...
