YASKAWA DX200 - Page 316

8 System Setup
8.23Safety Logic Circuit
8-229
182582-1CD
182582-1CD
MH900, DX200 Controller
7. Press [Enter] on the programming pendant and select “YES” to update
the data.
8. After the update, select {FILE}-{INITIALIZE}-{Machine Safety Board
FLASH Reset}. The initialization is completed when a bleep sounds.
Also, the message on the programming pendant disappears. If the
message, “Select 'Machine Safety Board FLASH Reset'.” appears in
the message area on the programming pendant, reset the FLASH data
of the functional safety board.
<The window when the functional safety function is disabled>
316 of 552