YASKAWA DX200 - Page 327

8-240
182582-1CD
182582-1CD
8 System Setup
8.23Safety Logic Circuit
MH900, DX200 Controller
The Timing Chart When the Servo On Enable (S-SVON_EN) Signal is
Enabled.
8.23.4.8 Signal List Window
The ON/OFF status list of signals used in the safety logic circuit is
displayed.
1. Select {SAFETY FUNC.}-{SLC SIGNAL DISPLAY}.
㻿㻱㻾㼂㻻㻌㻻㻺
㻾㻱㻭㻰㼅
㻱㼄㻰㻿㼃
㻼㻼㻰㻿㼃
㻿㻱㻾㼂㻻
㻻㻺
㻻㻲㻲
㻻㻺
㻻㻲㻲
㻻㻺
㻻㻲㻲
㻻㻺
㻻㻲㻲
㻿㻙㻿㼂㻻㻺㼋㻱㻺
㻻㻲㻲
㻻㻺
WARNING
Configure the optional safety PLC circuit so that the servo ON enable
(S-SVON_EN) signal is turned OFF by releasing the enable switch on
the programming pendant when this function is enabled.
327 of 552