YASKAWA DX200 - Page 328

8 System Setup
8.23Safety Logic Circuit
8-241
182582-1CD
182582-1CD
MH900, DX200 Controller
2. The signals used in the safety logic circuit are displayed. When the
optional field bus function is enabled, its signals are also displayed.
<The signal list when the field bus function (optional) is enabled>
8.23.4.9 Setting ON/OFF to the Input Signals
The ON/OFF status of input signals used in the safety logic circuit can be
switched.
1. Select {SAFETY FUNC.}-{SLC SIGNAL DISPLAY SET}.
328 of 552