YASKAWA DX200 - Page 357

8-270
182582-1CD
182582-1CD
8 System Setup
8.23Safety Logic Circuit
MH900, DX200 Controller
3. When the entered password is correct, the mode is changed to
{SAFETY MODE}. After changing to the safety mode, the icon is
displayed on the status area.
4. Select the file to be initialized.
– Select {I/O DATA} by going to {INITIALIZE} from {FILE} in the main
menu.
– The I/O data file list is displayed, and then select “YSF LOGIC
FILE”.
357 of 552