9 System Backup
9.3 Automatic Backup Function
9-12
182582-1CD
182582-1CD
MH900, DX200 Controller
9.3.2.3 RAMDISK on the YCP21 Board
RAMDISK will be shown when the high speed ethernet server function is
effective. Refer to the controller’s HIGH-SPEED ETHERNET SERVER
FUNCTION manual for more details.
9.3.2.4 Controller Status and Automatic Backup
* Retry is not performed when an error occurs.
* An error can be indicated by a message depending on setting.
Backup Timing Controller Status Automatic Backup
Compact
Flash
ready to
save the
data
Absence or
insufficient
capacity of the
CompactFlash
From a
specified
starting time
Teach mode Editing
(Accessing to
the memory)
Retry Retry
When editing is
interrupted
Backup Error
Play mode
Remote mode
Executing jobs Disabled Disabled
When stopped Backup Error
When a
specified signal
(#40560) is
input
Teach mode Editing
(Accessing to
the memory)
Error Error
When editing is
interrupted
Backup Error
Play mode
Remote mode
Executing jobs Disabled Disabled
When stopped Backup Error
When switching
the mode from
the teach mode
to the play
mode
- Backup Error
When the
controller starts
up
- Backup Error
To Next Page
Loading...
