YASKAWA DX200 - Page 435

12-7
182582-1CD
182582-1CD
12 Modification of System Configuration
12.2Allocating External I/O Signal
MH900, DX200 Controller
5. Select the external input signal number (at the change source) to be
changed. (In the setting example, select “#20010”.)
– The select menu appears.
6. Select “MODIFY”, and input the external input signal number (at the
change destination) to be changed. (In the setting example, enter
‘20190’.)
– The external I/O signal is changed.
7. Likewise, select/modify the number of the external input signal.
– Repeat select/modify until it becomes the desired allocation.
435 of 552