YASKAWA DX200 - Page 438

12 Modification of System Configuration
12.2Allocating External I/O Signal
12-10
182582-1CD
182582-1CD
MH900, DX200 Controller
Explanation about the External I/O Signal Allocation Window
The details of the window are explained using the window example. The
range over which the cursor can move is the hatched area of the figure.
 External I/O signal numbers
Indicates the beginning number of the external I/O signals allocated to
each I/O area. On the allocation window, the set values of these items
are used and displayed in ascending order. The following contents are
displayed.
#20010 to #25120: The number of the signal allocated to the beginning
of each I/O area, in the input signals
#30010 to #35120: The number of the signal allocated to the beginning
of each I/O area, in the output signals
#----- : Unallocated I/O area
 ST#
Indicates the DX200 station number allocated to each I/O board. The
displayed contents include the following:
0 : General I/O board (JANCD-YIO21)
1 to 13: Optional I/O board which is connected to the JANCD-YSF21
using a serial communication cable (The serial communication
station number is determined by the rotary switch setting on
each board.)
16 : The first field bus board
(Normally, optional board inserted into CN1 of the riser card in
the CPU rack.)
17 : The second field bus board
(Normally, optional board inserted into CN2 of the riser card in
the CPU rack.)
 CH
Indicates the channel number (network communication system) on the
board. The following contents are displayed.
0: I/O area for channel 1
1: I/O area for channel 2
#20010
#20060
#20070
#20120
#20160
#20190
#20200
ST#
14
16
16
16
16
17
17
0
0
0
0
0
0
0
0
254
1
2
3
254
0
0
0
1
6
10
0
1
5
1
5
4
3
1
6
YSF21
DN4-PCU-1
DN4-PCU-1
DN4-PCU-1
DN4-PCU-1
CCS-PCU
CCS-PCU
CH MAC ID ADDRBYTE NAME
EXTERNAL IO ALLOCATION(INPUT)
1234567
438 of 552