YASKAWA DX200 - Page 439

12-11
182582-1CD
182582-1CD
12 Modification of System Configuration
12.2Allocating External I/O Signal
MH900, DX200 Controller
 MAC ID
Indicates the network communication station number set in the channel
concerned on the board concerned. Regarding station numbers that
cannot be displayed, or station numbers that do not need to be dis-
played, ‘0’ is displayed. The following contents are displayed.
0 : No station number, or network communication station number ‘0’
Scanner station of EtherNet/IP board (PCU-ETHIO)
1 to 251 : Network communication station number ‘1’ to ‘251’
Adapter station of EtherNet/IP board (PCU-ETHIO)
(Scanner allocation number sequence)
252 : Unallocated I/O area of channel 1
253 : Unallocated I/O area of channel 2
254 : Communication status area of channel 1
255 : Communication status area of channel 2
 ADDR
Indicates the offset address from the beginning of each I/O area when
the inside of each I/O area is further divided into multiple parts.
 BYTE
Indicates the size (number of bytes) inside each I/O area.
 NAME
Indicates the name of each I/O board.
439 of 552