www.dadehpardazan.ir 88594014-15
7 Utility Functions (Fn)
7-14
4
Press the DATA/SHIFT Key. Offset
data will be displayed
as shown on the left.
5 Press the UP or DOWN Key to change the data.
6
Press the DATA/SHIFT Key to return to the screen as
shown o
n the left.
7
Press the MODE/SET Key to switch to channel 2 (analog
monitor 2) monitor output.
8
Press the DATA/SHIFT Key. Offset data will be displayed
as shown on the left.
9 Press the UP or DOWN Key to change the data.
10
Press the DATA/SHIFT Key for appro
ximately one second.
"Ch2-o" is displayed, and then "Fn00C" is displayed again.
(cont’d)
Step
Display after Opera-
tion
Keys Operation
MODE
SET
DATA
MODE
SET
DATA
MODE
SET
DATA
MODE
SET
DATA
To Next Page
Loading...
