www.dadehpardazan.ir 88594014-15
iii
About this Manual
This manual describes information required for designing, testing, adjusting, and maintaining -V Series
SERVOPACKs.
Keep this manual in a location where it can be accessed for
reference whenever required. Manuals outlined on
the following page must also be used as required by the application.
Description of Technical Terms
The following table shows the meanings of terms used in this manual.
IMPORTANT Explanations
The following icon is displayed for explanations requiring special attention.
Term Meaning
Cursor Input position indicated by
Digital Operator
Servomotor
-
V Series SGLGW, SGLFW, SGLTW, SGLC linear servomotor or
SGT linear slider
SERVOPACK -V Series SGDV servo amplifier
Servo Drive
A set including a servomotor and SER
VOPACK (i.e., a servo ampli-
fier)
Servo System
A servo control system that includes the combination of a servo drive
with a host controller and peripheral devices
Analog Pulse Model
Analog voltage and pulse train reference used for SERVOPACK inter-
face
Servo ON Power to motor ON
Servo OFF Power to motor OFF
Base Block (BB)
Power supply to motor is turned OFF by
shutting off the base current
to the power transistor in the current amplifier.
Servo Lock
A state in which the motor is stopped and is in position loop with a
position reference of 0.
Main Circuit Cable
Cables which connect to the main c
ircuit terminals, including main
circuit power supply cables, control power supply cables, servomotor
main circuit cables, and others.
Linear Scale Connection
Cables
A set of cables including a cable for con
necting serial converter unit, a
cable for connecting linear scale, and a cable for connecting hall sen-
sor
• Indicates important information that should be memorized, as well as precautions, such as
alarm displays, that do not involve potential damage to equipment.
To Next Page
Loading...
Need help?
General
