www.dadehpardazan.ir 88594014-15
viii
Installation
CAUTION
• When unpacking and installing magnetic way, check that no metal fragments or magnetized objects
near the magnetic because they may be affected by the magnetic attraction of the magnetic way.
Failure to observe this caution may result in injur
y or damage to the magnetic way's magnets.
• Do not use the magnetic way near metal or other magnetized objects.
Failure to observe this caution may result in injury.
• Do not place clocks, magnetic cards,
floppy disks, or measuring instruments close to the magnetic
way.
Failure to observe this caution may result in malfunction or damage to these items by the magnetic force.
• Securely mount the servomotor onto the machine.
If the servomotor is not mounted securely
, it may loosen during operation.
• Do not carry the magnetic way by its magnet protection cover.
Failure to observe this caution may result in
injury by the cover’s edge or the shape of the cover may become
distorted.
• When removing the dummy plate for reducing magnetic fo
rce used for the SGLFW magnetic way,
pay attention to the magnetic attraction of the magnetic way. Do not place the removed plate close
to the magnetic way.
Failure to observe this caution may result in injury or damage to the magnetic way’s magnets or the magnet
protection cover.
• Install SERVOPACKs, servomotors, and regenerative resistors
on nonflammable objects.
Installation directly onto or near flammable objects may result in fire.
• Never use the product in an environment subject to water, corrosive gases, flammable gases, or
comb
ustibles.
Failure to observe this caution may result
in electric shock or fire.
• Do not step on or place a heavy object on the product.
Failure to observe this caution may result in injury or malfunction.
• Do not cover the inlet or outlet ports and prevent
any foreign objects from entering the product.
Failure to observe this caution may cause internal eleme
nts to deteriorate resulting in malfunction or fire.
• Be sure to install the product in the correct direction.
Failure to observe this caution may result in malfunction.
• Provide the specified clearances between the SERVOP
ACK and the control panel or with other
devices.
Failure to observe this caution may result in fire or malfunction.
• Do not apply any strong impact.
Failure to observe this caution may result in malfunction.
To Next Page
Loading...
Need help?
General
