<1. Introduction>
11
IM 01E21A02-03EN
 Maintenance
WARNING
• If dirt, dust or other substances adhere to the glass of the display, wipe them clean with a soft
dry cloth.
• Maintenance of this product should be implemented in a maintenance service shop where
necessary devices and environment condition are provided. The required environmental
conditionisthattheambienttemperatureshouldbe5to40°C(humidityofwhichmaximum
relative humidity is 80% for temperatures 5 to 31 °C, and of which relative humidity linearly
decreasesto50%atatemperatureof40°Cwhenthetemperatureisover31°C).
 microSD card
IMPORTANT
• Do not store or use the microSD card in places with static electricity near electrically charged
objects or where electrical noise is present. Doing so can result in electric shock or damage
to the microSD card.
• Do not disassemble or modify the microSD card.
• Do not physically shock, bend, or twist the microSD card.
• Whilereading/writingdata,donotturno󰀨thepower,applyvibrationorshockorpulloutthe
card. Data can be corrupted or permanently lost.
• UseonlythemicroSDcardsspeciedbyYOKOGAWA.Theoperationcannotbeguaranteed
when other cards are used.
• When inserting the microSD card into the product, make sure to orient the microSD card
correctly(faceupordown)andinsertitsecurely.Ifnotinsertedcorrectly,themicroSDcard
will not be recognized by the product.
• Do not touch the microSD card with wet hands.
• Do not use the microSD card if it is dusty or dirty.
• The microSD card comes formatted. If you would like to format the microSD card, use the
product’s Format function.
• YOKOGAWAprovidesnowarrantyfordamageto,orlossofdatarecordedonthemicroSD
card, regardless of the cause of such damage or loss. We recommend regularly making
backup copies of your data.
To Next Page
Loading...
Need help?
General
