YOKOGAWA ADMAG TI Series User Manual

<5. Functions>
95
IM 01E21A02-03EN
NE
107
Error Message
Error Description Countermeasure FD bit
Display
F
OUNDATION
Fieldbus
C 329:PID Man Mode PID in Man Mode
The PID block is in the
Man mode.
Change the PID block
mode.
6 14
C 330:PID Not Schedule PID Not Scheduled
The PID block is
unscheduled.
Schedule the PID
block.
6 13
C 331:PID Bypass Mode PID in Bypass Mode
2.ON is selected by
BYPASS of PID.
Set BYPASS to 1.OFF. 6 12
C 332:IT1 O/S mode IT1 in O/S Mode
The IT1 block is in the
O/S mode.
Change the IT1 block
mode.
6 11
C 333:IT1 Man mode IT1 in Man Mode
The IT1 block is in the
Man mode.
Change the IT1 block
mode.
6 10
C 334:IT1 Not Schedule IT1 Not Scheduled
IT1 block is
unscheduled.
Schedule the IT1 block. 6 9
C 336:IT2 O/S Mode IT2 in O/S Mode
The IT2 block is in the
O/S mode.
Change the IT2 block
mode.
6 7
C 337:IT2 Man Mode IT2 in Man Mode
The IT2 block is in the
Man mode.
Change the IT2 block
mode.
6 6
C 338:IT2 Not Schedule IT2 Not Scheduled
IT2 block is
unscheduled.
Schedule the IT2 block. 6 5
C 340:DI1 O/S Mode DI1 in O/S Mode
The DI1 block is in the
O/S mode.
Change the DI1 block
mode.
6 3
C 341:DI1 Man Mode DI1 in Man Mode
The DI1 block is in the
Man mode.
Change the DI1 block
mode.
6 2
C 342:DI1 Not Schedule DI1 Not Scheduled
DI1 block is
unscheduled.
Schedule the DI1
block.
6 1
C 343:DI1 Simulate Act
DI1 Simulation
Active
DI1 simulation function
is running.
Disable SIMULATE.
Simulate En/Disable of
the DI1 block.
6 0
C 344:DI2 O/S Mode DI2 in O/S Mode
The DI2 block is in the
O/S mode.
Change the DI2 block
mode.
7 31
C 345:DI2 Man Mode DI2 in Man Mode
The DI2 block is in the
Man mode.
Change the DI2 block
mode.
7 30
C 346:DI2 Not Schedule DI2 Not Scheduled
DI2 block is
unscheduled.
Schedule the DI2
block.
7 29
C 347:DI2 Simulate Act
DI2 Simulation
Active
DI2 simulation function
is running.
Disable SIMULATE.
Simulate En/Disable of
the DI2 block.
7 28
C 348:DI3 O/S Mode DI3 in O/S Mode
The DI3 block is in the
O/S mode.
Change the DI3 block
mode.
7 27
C 349:DI3 Man Mode DI3 in Man Mode
The DI3 block is in the
Man mode.
Change the DI3 block
mode.
7 26
C 350:DI3 Not Schedule DI3 Not Scheduled
DI3 block is
unscheduled.
Schedule the DI3
block.
7 25
C 351:DI3 Simulate Act
DI3 Simulation
Active
DI3 simulation function
is running.
Disable SIMULATE.
Simulate En/Disable of
the DI3 block.
7 24
C 352:AR O/S Mode AR in O/S Mode
The AR block is in the
O/S mode.
Change the AR block
mode.
7 23
C 353:AR Man Mode AR in MAN Mode
The AR block is in the
Man mode.
Change the AR block
mode.
7 22
C 354:AR Not Scheduled AR Not Scheduled
The AR block is
unscheduled.
Schedule the AR block. 7 21
C 356:MAO O/S Mode MAO in O/S Mode
The MAO block is in
the O/S mode.
Change the MAO block
mode.
7 19
C 357:MAO NotSchedule MAO Not Scheduled
The MAO block is
unscheduled.
Schedule the MAO
block.
7 18
C 359:No FB Scheduled No FB Scheduled
No function block is
scheduled.
Check the schedule of
LAS communication or
function block.
7 16
C 360:SnsrTB O/S Mode
Sensor TB in O/S
Mode
The STB block is in the
O/S mode.
Change the STB block
mode.
7 15

YOKOGAWA ADMAG TI Series Specifications

General

Brand	YOKOGAWA
Model	ADMAG TI Series
Category	Measuring Instruments
Language	English