Craft Connection to the ML Getting Started
Auto Login to CPE disabled - hosted CPEs will be displayed under the CO but will
not be accessible by default. Selected CPEs can be accessed by right-clicking on the
CPE of interest and selecting Auto-connect.
NOTE: If Save Parameters is enabled, the Auto-login settings are saved.
5. LLDP - this option is relevant to ERPS. In order to configure ERPS (at a later phase), it
is required to enable LLDP.
6. Under Login Details:
Enter the User Name: admin (to perform configuration)
Enter the corresponding Password: admin
NOTE: User Name and Password are case sensitive. Change passwords according to
Password Control (on page 12-8).
7. To save parameters for the next login, checkmark Save Parameters.
8. Click OK. A new session is opened to the NE. The MetaASSIST View Main window
appears.
To Next Page
Loading...